Preventive Maintenance

NEVER Pay a Diagnostic Fee Again!*

Alamo Austin Air’s Annual Preventative Maintenance Program keeps your HVAC system running at optimal performance year-round.

We perform our remarkable 20-Point Air Conditioning Tune-Up to reduce energy usage in the summer while keeping you cool and greatly reducing the chances of unexpected failures during our blistering 100+ degree days.

We also include and perform a top of the line 31-Point Heating Tune-Up for safe & reliable heating usage all winter!

(31-Point Heating Tune-Up – QUALIFIES FOR A $40.00 REBATE FROM TEXAS GAS)

Our 20 Point Air Conditioning Tune-Up in the summer includes:

1. Check Thermostat
2. Flush condensate drains to protect against overflow*
3. Inspect indoor evaporator coil, if accessible
4. Evaluate the condition of air filters and other indoor air quality accessories
5. Clean the outdoor condenser coil and remove debris from inside unit
6. Visual contactor points inspection and ohm out coil
7. Check start/run capacitors microfarad readings
8. Visual Inspecting for refrigerant leaks
9. Inspect and tighten all electrical connections
10. Check blower motor start-up and run amperage for proper function
11. Check condenser fan motor start-up and run amperage for proper function
12. Check compressor start-up and run amperage for proper function
13. Check Freon pressures
14. Check superheat
15. Check subcooling
16. Check cooling temperature drop across the evaporator coil
17. Check static pressure
18. Visual External Duct Inspection
19. Provide recommendations for keeping system running at peak efficiency
20. Provide the customer with results

Our 31 Point Heating Tune-Up in the winter includes:

1. Perform Carbon Monoxide Test upon entry/exit
2. Check Thermostat contact & heat anticipator
3. Check Air Filtration System
4. Clean Flame sensor
5. Ohm out ignitor
6. Inspect and tighten electrical connections
7. Check Equipment and Ventilation Space
8. Check Flue and Venting
9. Check flame baffles
10. Check Pilot Safety/Thermocouple/ Spark Ignition
11. Check safety interlock switch
12. Check Gas Input Pressure
13. Clean and Check Gas Burners
14. Clean and Check Pilot and Pilot Tube
15. Inspect Gas Valve and Piping for leaks
16. Inspect Combustion Chamber entry point for blockages or combustible materials
17. Set Manifold Gas Outlet Pressure
18. Set Burner Air Adjustment if applicable
19. Verify flame sensor microamp reading within manufacture specs
20. Check Fan Control
21. Check inducer motor static pressure and vacuum tubing
22. Check inducer motor run amperage
23. Check blower motor start-up and run amperage for proper function
24. Lubricate blower motor if bearings are not sealed
25. Check Temperature Rise across heat exchanger
26. Check Limit Control above recorded heat rise
27. Verify proper Voltage while under full load
28. Check Static Pressure across blower
29. Visual Duct Inspection
30. Make Final Operation Check from thermostat
31. Provide Customer with Results

*Never Pay A Diagnostic Fee Again (Gold PMP Only)

No Diagnostic fee offer valid only when you have an active GOLD Preventative Maintenance Program

*FREE Refrigerant (Gold PMP Only)

Receive up to 1lb of R410A Refrigerant (a $59 value) each year we service your air conditioner

Priority Service Guaranteed (Both Plans)

Means you receive service the same day if you call before noon.

Silver PMP Receives: Full 10% Discount OFF Retail Prices

Gold PMP Receives: Full 15% Discount OFF Retail Prices

Please Note: This offer does not warranty against condensate blockages or water damage caused by blockages and cannot be applied toward system replacement.